Edelbrock Chrysler E-CNC Victor Heads

  • June 2, 2016

Place Your Orders Now!

Victor Small-Block Chrysler Heads

DESIGNED EXCLUSIVELY FOR LA ENGINES

These heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC intake, exhaust ports, combustion chamber and have an intake port volume of 225cc. These heads are an in-line valve design incorporating a 16° valve angle (stock is 18°) for improved air flow and increased power levels over heavily ported stock versions. They also feature the Chrysler W5 bolt pattern and have raised exhaust ports. The intake port has also been raised approximately 3/4" and the flange has also been extended to accommodate a stock (race) intake manifold such as our Super Victor #2815. Finally, a 5.56" overall length valve (+0.600" from stock) and raised rocker cover permit larger port cross-sections than in the stock head. Four versions are available; bare, bare with valves, complete (for hydraulic/flat tappet cams and solid roller cams) and Pro Port Raw. End-seal spacers are provided.

Small-block Chrysler E-CNC Victor
Cylinder Head 

Part
Number 

Bare, single

61709

Bare, with valves, single

61719

Complete, with solid roller camshaft springs, single

61729

Complete, with hydraulic roller cam springs, single

61739

Pro-Port version with valve seats and guides included, single

61749

www.Edelbrock.com Edelbrock, LLC, 2700 California St, Torrance, CA 90503